Car Amplifiers

Dual Channel, 150 W x 2, S/N Ratio: 80 dB

you are buying a brand new jbl gto 1001 ez mono bass amplifier car amplifier specifications mono subwoofer amplifier 650 watts rms x 1 at 4 ohms 1 000 watts rms x 1 at 2 ohms cea 2006 compliant frequency response 10 280 hz class d amp technology variable low pass filter 40 280 hz 12 db octave variable bass boost 0 12 db at 45 hz simple setup system with test tone cd for perfect gain setting optional wired remote level controller available soon preamp and speaker level inputs speaker wire to rca

Multi Channels, 150 W x 4, S/N Ratio: 100 dB

Mono Channel, 900 W x 1, S/N Ratio: 75 dB, THD at Rated RMS Power: 0.8%

No Description

jbl gto 1004 4 channel car amplifier with wiring kit specifications 100 watts rms x 4 channel at 4 ohms 150 watts rms x 4 channel at 2 ohms 225 watts rms x 2 channel at 4 ohms 3 channel mode 2 x 100 w rms 200 w rms for sub ratings at 14 4 v supply variable high low pass cross overs variable bass boost rear bass boost control rear crossover filter selector rear crossover frequency control overload protection rca aux output to connect to another amp signal to noise dba 104 dba reference rated powe

Mono Channel, 300 W x 1, S/N Ratio: 94 dB

Mono Channel, 400 W x 1, S/N Ratio: 60 dB

No Description

Multi Channels, 200 W x 4, S/N Ratio: 90 dB, THD at Rated RMS Power: 0.05%

ALPINE MRX-F30 4-CHANNEL CAR AMPLIFIER X-POWER DIGITAL AMPLIFIER FEATURES 4 Channel Power Amplifier High Efficiency Digital Circuit Design Variable Bass EQ Variable High Pass/ Low Pass Crossover Speaker Level Input With Remote Sensing 75 Watts PEAK 50 Watts RMS TERMS AND CONDITIONS Please read our policies thoroughly. Your bid is a binding contract. You adhere to these policies when you buy or make a bid.

Multi Channels, 100 W x 4, S/N Ratio: 95 dB, THD at Rated RMS Power: 0.06%

boss audio r 2000 m 2000 w mono car amplifier specifications 1 channel riot series mosfet mono power amplifier with remote subwoofer level control rms power 4 ohm 500 w x 1 max bridged power 2 ohm 2000 w x 1 signal to noise ratio 102 db thd 0 01 dimensions 10 7 16 w x 2 1 4 h x 15 1 2 l features mono bass amplifier remote subwoofer level control line and speaker level inputs variable gain control input sensitivity selector 0 to 18 db variable bass boost mosfet power supply variable low pass cros

Multi Channels, 90 W x 4, S/N Ratio: 76 dB, THD at Rated RMS Power: 0.04%

You are Buying a Brand New complete Bass Package Deal comprising of JBL CS-1214T, Boss 1500M amplifier, 10 Gauge Kit Zero. SPECIFICATION: Package includes: Boss Audio PH1500M SINGLE/MONO CHANNEL PHANTOM SERIES MOSFET BASS POWER AMPLIFIER WITH REMOTE SUBWOOFER LEVEL CONTROL MAX POWER, 2 OHM: 1500w x 1 RMS POWER, 4 OHM: 700w x 1 SIGNAL-TO-NOISE RATIO: >105 dB THD: 0.01% DIMENSIONS: 9-1/2W x 2-1/4H x 10L FEATURES: MOSFET POWER SUPPLY REMOTE SUBWOOFER LEVEL CONTROL LINE LEVEL AND SPEAKER LEVEL INPUTS VARIABLE GAIN CONTROL INPUT SENSITIVITY SELECTOR VARIABLE BASS BOOST 0 TO +18dB VARIABLE LOW PASS CROSSOVER POWER AND PROTECTION LEDS JBL CS-1214T Type : ported (rear of tube) 12 Inch Ported Subwoofer Tube for the car

No Description

You are Buying a Brand New JBL MS-A5001 Mono Block Amplifier MS SERIES SYSTEM INTEGRATION DIGITAL PROCESSOR / AMPLIFIER. Mono subwoofer amplifier 500 watts RMS x 1 (2 to 4 ohms) CEA-2006 compliant Selectable high- and low-pass filters (20-140 Hz; 6, 12, or 24 dB/octave) Optional wireless remote bass controller (automatically pairs with multiple JBL MS amps - MS-WBC) Class-D amplifier design Digital signal processing settings stored in non-volatile memory, no settings lost if power is disconnected Speaker-level inputs (RCA adapters included) "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages CD for system setup included Preamp inputs and outputs Output level controls fuse rating: 40A x 2 8-gauge power and ground leads and an 80-amp fuse recommended wiring and hardware not included with amplifier 7-3/16"W x 2-3/4"H x 8-1/4"D Brand New UK stock item with standard UK manufacturer's warranty.

Multi Channels, 85 W x 4, S/N Ratio: 98 dB, THD at Rated RMS Power: 0.05%

500 WS/N Ratio: 100 dB, THD at Rated RMS Power: 0.1%

JBL GTO-1004 4-CHANNEL CAR AMPLIFIER. BRAND NEW UK STOCK WITH ONE YEARS WARRANTY. P&P TO IRELAND (NORTH & SOUTH), CHANNEL ISLANDS, JERSEY, ISLE OF MAN, SHETLANDS will cost £15.00 total (ie UK non-mainland addresses). Main features: JBL GTO-1004 100 watts RMS x 4 channel at 4 ohms 150 watts RMS x 4 channel at 2 ohms 225 watts RMS x 2 channel at 4 ohms 3 channel mode: 2 x 100W RMS + 200W RMS for sub Ratings at 14.4V supply Variable HIGH & LOW Pass cross-overs Variable Bass Boost. Rear Bass Boost control Rear Crossover Filter selector Rear Crossover Frequency control Overload protection RCA Aux output to connect to another amp Signal-to-Noise (dBA) 104dBA (reference rated power into 4 ohms) THD 0.02% (rated power at 4 ohms) Frequency Response 10Hz - 100kHz (-3dB) Dimensions (L x W x H) 18-9/16" x 10-3/8" x 2-1/8"

Multi Channels, 120 W x 4, S/N Ratio: 105 dB

Dual Channel, 150 W x 2, S/N Ratio: 100 dB

JBL MS-A5001 - mono (1 channel) CAR AMPLIFIER SPECIFICATIONS: MS SERIES SYSTEM INTEGRATION DIGITAL PROCESSOR / AMPLIFIER. Mono subwoofer amplifier 500 watts RMS x 1 (2 to 4 ohms) CEA-2006 compliant Selectable high- and low-pass filters (20-140 Hz; 6, 12, or 24 dB/octave) Optional wireless remote bass controller (automatically pairs with multiple JBL MS amps - MS-WBC) Class-D amplifier design Digital signal processing settings stored in non-volatile memory, no settings lost if power is disconnected Speaker-level inputs (RCA adapters included) "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages CD for system setup included Preamp inputs and outputs Output level controls fuse rating: 40A x 2 8-gauge power and ground leads and an 80-amp fuse recommended wiring and hardware not included with amplifier 7-3/16"W x 2-3/4"H x 8-1/4"D BL's stylish MS Series "Tiny" amps measure only 7" by 8" so you can tuck one into virtually any hiding place that has

FLI 4 Channel Amplifier

boss audio ph 4000 d 4000 w mono car amplifier specifications class d monoblock power amplifier with remote subwoofer level control max power 1 ohm 4000 w x 1 max power 2 ohm 3000 w x 1 rms power 4 ohm 1600 w x 1 signal to noise ratio 105 db thd 0 01 dimensions 9 1 2 w x 2 1 4 h x 15 l features remote subwoofer control low level inputs line outs for system building variable gain control input sensitivity selector variable low pass crossover variable bass boost 0 to 18 db variable subsonic filter

You are Buying a Brand New JBL MS-A1004 - 4 Channel Car Amp Amplifier Specifications: MS SERIES SYSTEM INTEGRATION DIGITAL PROCESSOR / AMPLIFIER. 4-channel car amplifier 100 watts RMS x 4 (2 to 4 ohms) 200 watts RMS x 2 (2 to 4 ohms) CEA-2006 compliant Selectable high- and low-pass filters (20-20K Hz; 6, 12, or 24 dB/octave) Optional wireless remote bass controller (automatically pairs with multiple JBL MS Series amps) Class-D amplifier design Digital signal processing settings stored in non-volatile memory, no settings lost if power is disconnected Input mixer distributes signal without need for Y-cables Speaker-level inputs (RCA adapters included) "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages CD for system setup included Preamp inputs and outputs Output level controls fuse rating: 30A x 2 Dimensions: 7-3/16"W x 2-3/4"H x 8-1/4"D

You are Buying a Brand New JBL GTO-504EZ - 4 Channel Amplifier Car Amp Amplifier Specifications: 4-channel amplifier, bridgeable into 3 or 2-channel mode. 50 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms) 150 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode) Frequency response: 20-23, 000 Hz Class AB amp technology Variable low- and high pass filters (40-220 Hz, 12 dB/octave) Variable bass boost on rear channels (0-12 dB at 45 Hz) Simple Setup System with test tone CD for perfect gain setting routing switch for 2-channel sources Preamp outputs Preamp and speaker-level inputs (speaker wire-to-RCA adapters included) Switchable automatic signal-sensing turns on amp without need for remote lead Fuse rating: 20A x 2 8-gauge power and ground leads recommended wiring and hardware not included with amplifier Dimensions: 8-3/8"W x 2-9/16"H x 9-11/16"D Brand New UK stock item with standard UK manufacturer's warranty. DELIVERY TO OTHER UK-NON MAINLAND ADDRESSES (SUCH AS N.

JBL MS-A1004 - 4-channel CAR AMPLIFIER SPECIFICATIONS: MS SERIES SYSTEM INTEGRATION DIGITAL PROCESSOR / AMPLIFIER. 4-channel car amplifier 100 watts RMS x 4 (2 to 4 ohms) 200 watts RMS x 2 (2 to 4 ohms) CEA-2006 compliant Selectable high- and low-pass filters (20-20K Hz; 6, 12, or 24 dB/octave) Optional wireless remote bass controller (automatically pairs with multiple JBL MS Series amps) Class-D amplifier design Digital signal processing settings stored in non-volatile memory, no settings lost if power is disconnected Input mixer distributes signal without need for Y-cables Speaker-level inputs (RCA adapters included) "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages CD for system setup included Preamp inputs and outputs Output level controls fuse rating: 30A x 2 Dimensions: 7-3/16"W x 2-3/4"H x 8-1/4"D BL's stylish MS Series "Tiny" amps measure only 7" by 8" so you can tuck one into virtually any hiding place that has adequate ventilation

Power and Sound PDX-M12 - Mono Power Density Digital Amplifier Meet the New Amplifier Benchmark The new Alpine PDX Series amplifiers are completely re-engineered for performance, sound quality, and reliability. The PDX series are for the true car audio enthusiast, all from a compact size. Consider the bar raised. Description New Reference Grade Output Stage Ultra-Wide Frequency Response This super-wide, industry leading frequency range offers listeners unparallel sound quality and detail that bests even the most high-end audiophile equipment. 5Hz-100kHz for 4ch, 5Hz-400Hz for Mono (+0, -3dB) These new PDX amplifiers are the first ever class-D amplifiers to break tradition and trump the amps of yesterday. The PDX-M12, PDX-M6, PDX-F6, and PDX-F4 are synonymous with extremely high frequency reproduction. The THD is actually falling at high frequencies, resulting in a clean and clear signal where your ear is most sensitive to distortions. -<0.005% THD+N @ 1W, <0.05% THD+N @ rated power. Signal to Noise These amps

Multi Channels, 4 Channel(s), S/N Ratio: 105 dB