Garden

Why pay less for a watering can when you can have one which will last for decades? British made, to the highest standards by watering can experts Haws. Holds 3.5 litres, and the longer spout is good for hard to reach areas. Ideal for greenhouses. Measures 25cm high x 18.5cm wide x 65cm long.

This is a very special traditional style watering can from the top drawer. Made from heavy guage hot dipped galvanised steel which has been painted red. Features two hard wood handles (from renewable stock) for easy handling and a round brass watering sprayhead. There is a parking point for the spary head when not in use. The body has a raised lattice design. Capacity: 8.8 Litres

An attractive water butt made from an ex-distillery, 181 litre (40 gallon) oak barrel.Teetotallers please note: there is a real scotch whiskey smell in the barrel so you may wish to wash it out before first use ! These barrels may have coloured paint on the top this is a feature of these ex-distillery barrels. we would advise this can be painted over using a black gloss paint if required to make it look more natural in the garden. When positioning your barrel ensure you use a brick or paving slab base to enable you to fill watering cans from the tap. It is best to site the barrel in a shaded position as this will give the barrel a longer life. During a hot summer you should never fully empty the barrel so the timber does not shrink and leak.A 83mm hole has been cut in the top to fit most standard sized drain pipes (see instructions at bottom if you want to fit a rain diverter). A 20mm hole has been cut 16cm from the base ready to fit a standard brass tap (simply screw the tap into the wood and it will be nice and tight). This barrel has been photographed with a decorative tap (not included).Fitting a rain diverter It can be done! The hole for the rain diverter needs to be 12cm from the top due to the metal banding on the barrel. This means that your water butt will never fill to the top! To cut 25mm hole - use a hole saw on an arbour that fits a normal electric drill.  25mm Hole Saw and Arbour.   The 'elbow' of the rain diverter can then be screwed into this hole and this will normally give a watertight fit (the plastic nut supplied is not required) - if it doesn't fit - a little plumbers PTFE tape can help.N.B. This water butt is approximately 90cm tall, 200cm girth and 60cm in diameter, and therefore will not fit through a standard single doorway easily."

8 litre 'slimcan' watering can made from heavy gauge steel supplied with all brass round rose

A classic long reach watering can for the gardener who wants the very best. Produced from heavy gauge steel with a hot dip galvanised zinc coating to resist rust

A new, smaller version of the best-selling traditional watering can from Haws. Made from heavy-guage steel which is hot-dip galvanised to prevent rust, and with a powder-coated finish. Haws know how to make cans - they've been doing it since 1886 - and this will give many good seasons of service.

The Slimcan is an oval shape watering can with a single handle running front to back. Made from heavy gauge steel with a hot-dip galvanised zinc coating resisting rust. Comes with a removable all brass spray rose. Manufactured to the Highest Quality Available. Design is stylish and innovative. Satisfaction Ensured. Great Gift Idea.

A great gift for the gardener! Not only is it very stylish but also incredibly practical too, and a hot favourite with the crew here. As recommended in the 'The Telegraph' (April 22nd 2006)Features:Hot dip galvanised (so it wont rust) Powder coated (very hard wearing)Complete with removable brass rose 5lt capacity

A beautiful, hand-made watering can made by Haws - makers of the finest watering cans used throughout the world since 1886. These very special, one-litre cans are made in at the Haws British factory in the Midlands. Each can is individually made using a hand-operated metal rolling machine - even the powder-coated finished is applied entirely by hand. The finished can has an all-brass watering rose and is gift-boxed. The can is ideal for watering house and conservatory plants, as well as young plants & seedlings which need gentle watering. Or simply enjoy the craftsmanship and put it on display. Measurements: 35cm max width, 16cm high.

Haws heavy duty plastic watering cans are made from extremely hard wearing material with high impact strength. They are built for extensive use over a number of years. The watering cans are light in weight, and perfectly balanced. This watering can is made from heavy duty plastic, is easy to lift and well balanced. Complete with brass rose, a 6.8ltr capacity and a best seller.

Woodgrain effect, Fitted with traditional barrel effect banding Child-safe lid, Complete with a tap as standard Minimal assembly required, 200 litre capacity, Handles for easy lifting Guaranteed for 5 years, Manufactured from at least 75% recycled content Space Sava stand allows a watering can to be filled from the water butt

A classic long reach watering can for the gardener who wants the very best. Produced from heavy gauge steel with a hot dip galvanised zinc coating to resist rust ** IMPORTANT DELIVERY INFORMATION** - Please note that we are unfortunately unable to deliver to the following postcode areas: IV3-IV40, IV52-IV54, IV63, KW1-KW14, PA20-PA40, PH19-PH40, PH50, IV41-IV51, IV55-IV56, KA27, KA28, KW15-KW17, PA41, PA42-PA49, PA60, PA61, PA62-PA76, PA77, PA78, PH41-PH44. All HS and all ZE postcodes along with areas within the Scottish Highlands & Islands, Channel Islands, Isle of Man, Isles of Wight, Northern Ireland and the Channel Islands.

brand maxicrop for lawns purpose weed control type moss killer weed control type chemical weed pest control method chemical now is the ideal time to be treating unwanted moss in your lawn why not give your grass a tonic at the same time pack treats 320 500 m 2 seaweed extract with added ferrous sulphate liquid application saturates moss and kills it quickly and efficiently simply mix with water in a watering can or sprayer seaweed extract tonic encourages grass re growth and improves rooting for

A beautiful, hand-made watering can made by Haws - makers of the finest watering cans used throughout the world since 1886. These very special, one-litre cans are made in at the Haws British factory in the Midlands. Each can is individually made using a hand-operated metal rolling machine - even the powder-coated finished is applied entirely by hand. The finished can has an all-brass watering rose and is gift-boxed. The can is ideal for watering house and conservatory plants, as well as young plants & seedlings which need gentle watering. Or simply enjoy the craftsmanship and put it on display. Measurements: 35cm max width, 16cm high.

This metal indoor watering can makes a superb present for an indoor plant enthusiast. Its classic contours and durable power red coating means it can be left out between waterings. It holds 1 litre (2 pints) and features a gently curved spout to make watering easier.

8 litre watering can by Haws, heavy gauge steel with hot dip zinc galvanised coating, supplied with all brass round watering rose.

A new, smaller version of the best-selling traditional watering can from Haws. Made from heavy-guage steel which is hot-dip galvanised to prevent rust, and with a powder-coated finish. Haws know how to make cans - they've been doing it since 1886 - and this will give many good seasons of service.

NEW! Haws 5-Litre Slimcan Sage Green Watering Can

Haws Traditional 'Peter Rabbit' Titanium Watering Can

Haws 8.8 Litre Heritage Steel Watering Can

Haws 1 Litre Indoor Metal Watering Can - Ruby Red

Haws 1 Litre painted metal Indoor Can - Green Made from galvanised sheet metal, with a powder coated paint finish. Comes with a baby oval all brass watering rose

Haws 1 Litre Indoor Metal Watering Can - Aubergine

A classic long reach watering can for the gardener who wants the very best.

A top-quality Peter Rabbit style traditional watering can from Haws. Made from heavy-guage steel which is hot-dip galvanised to prevent rust. Large, 8.8 litres capacity.

Still made in Britain, as they have been for over 120 years, Haws Watering Cans are recognised and renowned around the world. This Fine as Rain 8.8-litre traditionally styled can is one of the very best in the market today, and will last for many, many seasons.

Haws 8.8 Litre Heritage Steel Watering Can

Premium quality hand made British watering can the perfect gift idea.

Brintons Patio Magic is the easy way to clean patios, and other stone surfaces with no scrubbing, no need for a pressure washer, and no need to hose down. It kills algae, mould and moss within two to four days and has a gentle cleaning action in the following weeks. Patio Magic! can be used on all outdoor hard surfaces, including patios, driveways, decking, fencing, garden furniture, sheds, conservatories tarmac and asphalt, concrete, garden ornaments, headstones, masonry and even glass, PVC and artificial surfaces. No Pressure Washing, No Scrubbing, No Sweat!Unique new generation high performance antibacterial fungicide which kills mould, algae and moss with in days and then helps to clean the treated surfaces in the following weeks and months.Just dilute and apply with watering can or low pressure garden sprayer5L Concentrate (Makes up to 50L)Perfect for Patios, Garden Furniture and Conservatories

Sankey Twist-It 1043 10-Litre Watering Can (Black)